And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.735
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.518
And
I accept adding "cowsay" to Additional Software
4.977
And
Additional Software is correctly configured for package "cowsay"
0.639
And
I shutdown Tails and wait for the computer to power off
8.144
And
I start Tails from USB drive "__internal" with network unplugged
37.084
And
I enable persistence
9.688
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.705
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.219
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.016
And
available upgrades have been checked
1.114
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.482
And
I can open the Additional Software configuration window from the notification
2.640
And
I shutdown Tails and wait for the computer to power off
22.589
And
I start Tails from USB drive "__internal" with network unplugged
37.251
And
I enable persistence
10.260
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.442
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.245
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057