And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.553
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.581
And
I accept adding "cowsay" to Additional Software
3.626
And
Additional Software is correctly configured for package "cowsay"
0.630
And
I shutdown Tails and wait for the computer to power off
4.158
And
I start Tails from USB drive "__internal" with network unplugged
35.135
And
I enable persistence
9.782
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
9.258
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.240
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.014
And
available upgrades have been checked
2.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.434
And
I can open the Additional Software configuration window from the notification
2.524
And
I shutdown Tails and wait for the computer to power off
13.137
And
I start Tails from USB drive "__internal" with network unplugged
35.707
And
I enable persistence
9.236
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.015
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.052