And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.084
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.481
And
I accept adding "cowsay" to Additional Software
3.664
And
Additional Software is correctly configured for package "cowsay"
0.580
And
I shutdown Tails and wait for the computer to power off
8.318
And
I start Tails from USB drive "__internal" with network unplugged
35.802
And
I enable persistence
9.058
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
8.794
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.211
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.073
And
the network is plugged
0.015
And
available upgrades have been checked
2.150
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.481
And
I can open the Additional Software configuration window from the notification
2.495
And
I shutdown Tails and wait for the computer to power off
18.601
And
I start Tails from USB drive "__internal" with network unplugged
35.431
And
I enable persistence
8.889
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.995
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059