And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.287
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.330
And
I accept adding "cowsay" to Additional Software
4.835
And
Additional Software is correctly configured for package "cowsay"
0.625
And
I shutdown Tails and wait for the computer to power off
3.942
And
I start Tails from USB drive "__internal" with network unplugged
35.325
And
I enable persistence
8.869
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
9.130
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.018
And
available upgrades have been checked
1.109
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.498
And
I can open the Additional Software configuration window from the notification
2.519
And
I shutdown Tails and wait for the computer to power off
11.973
And
I start Tails from USB drive "__internal" with network unplugged
36.104
And
I enable persistence
9.672
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.415
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.176
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066