And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.566
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.667
And
I accept adding "cowsay" to Additional Software
3.711
And
Additional Software is correctly configured for package "cowsay"
0.625
And
I shutdown Tails and wait for the computer to power off
7.922
And
I start Tails from USB drive "__internal" with network unplugged
36.350
And
I enable persistence
8.631
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
9.976
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.015
And
available upgrades have been checked
2.133
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.401
And
I can open the Additional Software configuration window from the notification
2.529
And
I shutdown Tails and wait for the computer to power off
22.238
And
I start Tails from USB drive "__internal" with network unplugged
36.017
And
I enable persistence
8.918
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.261
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067