And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.576
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.359
And
I accept adding "cowsay" to Additional Software
3.696
And
Additional Software is correctly configured for package "cowsay"
0.687
And
I shutdown Tails and wait for the computer to power off
7.941
And
I start Tails from USB drive "__internal" with network unplugged
36.727
And
I enable persistence
9.805
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.225
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.054
And
the network is plugged
0.013
And
available upgrades have been checked
2.207
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.464
And
I can open the Additional Software configuration window from the notification
2.558
And
I shutdown Tails and wait for the computer to power off
11.880
And
I start Tails from USB drive "__internal" with network unplugged
36.384
And
I enable persistence
10.553
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.486
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.498
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.045
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079