And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.823
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.872
And
I accept adding "cowsay" to Additional Software
4.793
And
Additional Software is correctly configured for package "cowsay"
0.669
And
I shutdown Tails and wait for the computer to power off
8.149
And
I start Tails from USB drive "__internal" with network unplugged
37.587
And
I enable persistence
10.281
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
12.308
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.706
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.024
And
available upgrades have been checked
1.086
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.502
And
I can open the Additional Software configuration window from the notification
2.557
And
I shutdown Tails and wait for the computer to power off
22.849
And
I start Tails from USB drive "__internal" with network unplugged
38.116
And
I enable persistence
10.613
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.170
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.071
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067