And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.123
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.547
And
I accept adding "cowsay" to Additional Software
3.622
And
Additional Software is correctly configured for package "cowsay"
0.633
And
I shutdown Tails and wait for the computer to power off
4.105
And
I start Tails from USB drive "__internal" with network unplugged
36.684
And
I enable persistence
12.362
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.404
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.015
And
available upgrades have been checked
2.183
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.491
And
I can open the Additional Software configuration window from the notification
2.571
And
I shutdown Tails and wait for the computer to power off
17.213
And
I start Tails from USB drive "__internal" with network unplugged
37.097
And
I enable persistence
9.070
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.049
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.207
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068