And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.695
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.859
And
I accept adding "cowsay" to Additional Software
3.604
And
Additional Software is correctly configured for package "cowsay"
0.593
And
I shutdown Tails and wait for the computer to power off
7.997
And
I start Tails from USB drive "__internal" with network unplugged
35.860
And
I enable persistence
9.167
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
8.866
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.198
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.015
And
available upgrades have been checked
1.136
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.981
And
I can open the Additional Software configuration window from the notification
2.515
And
I shutdown Tails and wait for the computer to power off
13.365
And
I start Tails from USB drive "__internal" with network unplugged
35.455
And
I enable persistence
8.777
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
9.177
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.186
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.062
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069