And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.779
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.911
And
I accept adding "cowsay" to Additional Software
3.628
And
Additional Software is correctly configured for package "cowsay"
0.553
And
I shutdown Tails and wait for the computer to power off
2.657
And
I start Tails from USB drive "__internal" with network unplugged
35.688
And
I enable persistence
8.599
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.444
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.193
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.020
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.956
And
I can open the Additional Software configuration window from the notification
2.500
And
I shutdown Tails and wait for the computer to power off
17.001
And
I start Tails from USB drive "__internal" with network unplugged
35.458
And
I enable persistence
8.720
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.139
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.163
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063