And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.593
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.657
And
I accept adding "cowsay" to Additional Software
4.986
And
Additional Software is correctly configured for package "cowsay"
0.776
And
I shutdown Tails and wait for the computer to power off
8.192
And
I start Tails from USB drive "__internal" with network unplugged
38.271
And
I enable persistence
9.459
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.148
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.244
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.017
And
available upgrades have been checked
2.180
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.413
And
I can open the Additional Software configuration window from the notification
2.542
And
I shutdown Tails and wait for the computer to power off
17.639
And
I start Tails from USB drive "__internal" with network unplugged
37.672
And
I enable persistence
9.559
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.108
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.189
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071