And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.787
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.083
And
I accept adding "cowsay" to Additional Software
4.940
And
Additional Software is correctly configured for package "cowsay"
0.722
And
I shutdown Tails and wait for the computer to power off
4.143
And
I start Tails from USB drive "__internal" with network unplugged
37.248
And
I enable persistence
9.488
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.293
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.022
And
available upgrades have been checked
1.152
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.655
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
17.612
And
I start Tails from USB drive "__internal" with network unplugged
38.053
And
I enable persistence
9.309
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.283
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.164
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072