And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.048
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.264
And
I accept adding "cowsay" to Additional Software
4.833
And
Additional Software is correctly configured for package "cowsay"
0.612
And
I shutdown Tails and wait for the computer to power off
4.090
And
I start Tails from USB drive "__internal" with network unplugged
37.198
And
I enable persistence
10.527
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.566
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.015
And
available upgrades have been checked
1.141
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.961
And
I can open the Additional Software configuration window from the notification
2.506
And
I shutdown Tails and wait for the computer to power off
13.321
And
I start Tails from USB drive "__internal" with network unplugged
38.595
And
I enable persistence
10.822
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.063
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.072
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071