And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.646
And
I configure APT to prefer an old version of cowsay
0.008
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.911
And
I accept adding "cowsay" to Additional Software
4.944
And
Additional Software is correctly configured for package "cowsay"
0.606
And
I shutdown Tails and wait for the computer to power off
4.019
And
I start Tails from USB drive "__internal" with network unplugged
37.885
And
I enable persistence
9.615
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.264
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.201
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.059
And
the network is plugged
0.016
And
available upgrades have been checked
1.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.472
And
I can open the Additional Software configuration window from the notification
2.567
And
I shutdown Tails and wait for the computer to power off
13.398
And
I start Tails from USB drive "__internal" with network unplugged
39.050
And
I enable persistence
9.492
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.858
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.250
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089