And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.802
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.152
And
I accept adding "cowsay" to Additional Software
4.853
And
Additional Software is correctly configured for package "cowsay"
0.742
And
I shutdown Tails and wait for the computer to power off
4.121
And
I start Tails from USB drive "__internal" with network unplugged
39.449
And
I enable persistence
10.017
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
10.791
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.071
And
the network is plugged
0.017
And
available upgrades have been checked
2.148
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.452
And
I can open the Additional Software configuration window from the notification
2.567
And
I shutdown Tails and wait for the computer to power off
18.170
And
I start Tails from USB drive "__internal" with network unplugged
37.075
And
I enable persistence
9.116
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.031
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.225
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.070
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059