And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.815
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.767
And
I accept adding "cowsay" to Additional Software
6.172
And
Additional Software is correctly configured for package "cowsay"
0.662
And
I shutdown Tails and wait for the computer to power off
4.199
And
I start Tails from USB drive "__internal" with network unplugged
38.188
And
I enable persistence
9.686
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
9.945
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.018
And
available upgrades have been checked
2.190
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.682
And
I can open the Additional Software configuration window from the notification
2.636
And
I shutdown Tails and wait for the computer to power off
13.541
And
I start Tails from USB drive "__internal" with network unplugged
38.145
And
I enable persistence
10.191
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.546
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.257
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056