And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:25.899
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.783
And
I accept adding "cowsay" to Additional Software
4.849
And
Additional Software is correctly configured for package "cowsay"
0.625
And
I shutdown Tails and wait for the computer to power off
4.075
And
I start Tails from USB drive "__internal" with network unplugged
38.801
And
I enable persistence
11.088
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.358
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.040
And
the network is plugged
0.016
And
available upgrades have been checked
2.160
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.499
And
I can open the Additional Software configuration window from the notification
2.607
And
I shutdown Tails and wait for the computer to power off
18.881
And
I start Tails from USB drive "__internal" with network unplugged
37.892
And
I enable persistence
9.629
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
10.633
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066