And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.831
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.462
And
I accept adding "cowsay" to Additional Software
4.858
And
Additional Software is correctly configured for package "cowsay"
0.611
And
I shutdown Tails and wait for the computer to power off
4.031
And
I start Tails from USB drive "__internal" with network unplugged
39.425
And
I enable persistence
11.641
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
10.310
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.701
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.017
And
available upgrades have been checked
2.172
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.036
And
I can open the Additional Software configuration window from the notification
2.546
And
I shutdown Tails and wait for the computer to power off
13.962
And
I start Tails from USB drive "__internal" with network unplugged
40.815
And
I enable persistence
10.286
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.850
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.296
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061