And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.185
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.743
And
I accept adding "cowsay" to Additional Software
4.971
And
Additional Software is correctly configured for package "cowsay"
0.693
And
I shutdown Tails and wait for the computer to power off
3.995
And
I start Tails from USB drive "__internal" with network unplugged
38.456
And
I enable persistence
10.503
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
9.698
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.212
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.024
And
available upgrades have been checked
2.195
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.424
And
I can open the Additional Software configuration window from the notification
2.532
And
I shutdown Tails and wait for the computer to power off
13.390
And
I start Tails from USB drive "__internal" with network unplugged
37.168
And
I enable persistence
9.229
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.731
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.188
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062