And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:15.810
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.388
And
I accept adding "cowsay" to Additional Software
3.632
And
Additional Software is correctly configured for package "cowsay"
0.594
And
I shutdown Tails and wait for the computer to power off
3.995
And
I start Tails from USB drive "__internal" with network unplugged
35.664
And
I enable persistence
8.719
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
9.356
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.218
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.019
And
available upgrades have been checked
1.083
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.398
And
I can open the Additional Software configuration window from the notification
2.482
And
I shutdown Tails and wait for the computer to power off
13.109
And
I start Tails from USB drive "__internal" with network unplugged
35.574
And
I enable persistence
8.904
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.988
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067