And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.053
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.345
And
I accept adding "cowsay" to Additional Software
5.135
And
Additional Software is correctly configured for package "cowsay"
0.783
And
I shutdown Tails and wait for the computer to power off
4.241
And
I start Tails from USB drive "__internal" with network unplugged
40.693
And
I enable persistence
11.234
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.114
And
I log in to a new session
13.187
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.222
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.065
And
the network is plugged
0.030
And
available upgrades have been checked
1.119
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.568
And
I can open the Additional Software configuration window from the notification
2.559
And
I shutdown Tails and wait for the computer to power off
17.534
And
I start Tails from USB drive "__internal" with network unplugged
39.668
And
I enable persistence
11.395
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.296
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.262
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.087
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089