And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.041
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.493
And
I accept adding "cowsay" to Additional Software
3.636
And
Additional Software is correctly configured for package "cowsay"
0.653
And
I shutdown Tails and wait for the computer to power off
4.051
And
I start Tails from USB drive "__internal" with network unplugged
36.664
And
I enable persistence
8.914
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
8.618
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.174
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.055
And
the network is plugged
0.015
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.517
And
I can open the Additional Software configuration window from the notification
2.541
And
I shutdown Tails and wait for the computer to power off
13.151
And
I start Tails from USB drive "__internal" with network unplugged
36.587
And
I enable persistence
9.264
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.675
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054