And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.171
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.866
And
I accept adding "cowsay" to Additional Software
3.732
And
Additional Software is correctly configured for package "cowsay"
0.701
And
I shutdown Tails and wait for the computer to power off
4.077
And
I start Tails from USB drive "__internal" with network unplugged
37.093
And
I enable persistence
10.564
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
9.534
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.017
And
available upgrades have been checked
3.240
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.468
And
I can open the Additional Software configuration window from the notification
2.616
And
I shutdown Tails and wait for the computer to power off
17.209
And
I start Tails from USB drive "__internal" with network unplugged
37.837
And
I enable persistence
10.011
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.503
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.599
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.044
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067