And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:22.243
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.972
And
I accept adding "cowsay" to Additional Software
3.626
And
Additional Software is correctly configured for package "cowsay"
0.705
And
I shutdown Tails and wait for the computer to power off
4.197
And
I start Tails from USB drive "__internal" with network unplugged
37.657
And
I enable persistence
9.551
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.920
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.217
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.019
And
available upgrades have been checked
1.132
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.979
And
I can open the Additional Software configuration window from the notification
2.594
And
I shutdown Tails and wait for the computer to power off
18.857
And
I start Tails from USB drive "__internal" with network unplugged
38.837
And
I enable persistence
9.586
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.050
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.068
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057