And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.467
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.472
And
I accept adding "cowsay" to Additional Software
4.953
And
Additional Software is correctly configured for package "cowsay"
0.663
And
I shutdown Tails and wait for the computer to power off
4.176
And
I start Tails from USB drive "__internal" with network unplugged
40.053
And
I enable persistence
9.507
And
I configure APT to prefer an old version of cowsay
0.015
And
I disable the tails-virt-notify-user.service user unit
0.086
And
I log in to a new session
11.142
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.215
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.023
And
available upgrades have been checked
2.148
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.554
And
I can open the Additional Software configuration window from the notification
2.584
And
I shutdown Tails and wait for the computer to power off
13.642
And
I start Tails from USB drive "__internal" with network unplugged
38.810
And
I enable persistence
10.305
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.740
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067