And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.196
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.045
And
I accept adding "cowsay" to Additional Software
4.872
And
Additional Software is correctly configured for package "cowsay"
0.676
And
I shutdown Tails and wait for the computer to power off
4.135
And
I start Tails from USB drive "__internal" with network unplugged
40.145
And
I enable persistence
11.918
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
10.001
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.017
And
available upgrades have been checked
1.130
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.110
And
I can open the Additional Software configuration window from the notification
2.520
And
I shutdown Tails and wait for the computer to power off
13.794
And
I start Tails from USB drive "__internal" with network unplugged
40.095
And
I enable persistence
11.008
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.854
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.059
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079