And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.985
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.479
And
I accept adding "cowsay" to Additional Software
4.853
And
Additional Software is correctly configured for package "cowsay"
0.948
And
I shutdown Tails and wait for the computer to power off
4.099
And
I start Tails from USB drive "__internal" with network unplugged
40.733
And
I enable persistence
11.023
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.111
And
I log in to a new session
13.165
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.254
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.079
And
I prepare the Additional Software upgrade process to fail
0.108
And
the network is plugged
0.040
And
available upgrades have been checked
1.126
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.570
And
I can open the Additional Software configuration window from the notification
2.666
And
I shutdown Tails and wait for the computer to power off
13.995
And
I start Tails from USB drive "__internal" with network unplugged
40.727
And
I enable persistence
10.928
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.006
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.600
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.054
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063