And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.954
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.171
And
I accept adding "cowsay" to Additional Software
4.967
And
Additional Software is correctly configured for package "cowsay"
0.765
And
I shutdown Tails and wait for the computer to power off
4.164
And
I start Tails from USB drive "__internal" with network unplugged
39.443
And
I enable persistence
10.727
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
10.122
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.263
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.015
And
available upgrades have been checked
2.259
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.607
And
I can open the Additional Software configuration window from the notification
2.693
And
I shutdown Tails and wait for the computer to power off
19.106
And
I start Tails from USB drive "__internal" with network unplugged
39.060
And
I enable persistence
10.707
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.569
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066