And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.739
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.055
And
I accept adding "cowsay" to Additional Software
3.768
And
Additional Software is correctly configured for package "cowsay"
0.655
And
I shutdown Tails and wait for the computer to power off
4.357
And
I start Tails from USB drive "__internal" with network unplugged
38.682
And
I enable persistence
10.780
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
10.629
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.513
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.067
And
the network is plugged
0.013
And
available upgrades have been checked
1.119
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.998
And
I can open the Additional Software configuration window from the notification
2.578
And
I shutdown Tails and wait for the computer to power off
18.636
And
I start Tails from USB drive "__internal" with network unplugged
38.401
And
I enable persistence
10.029
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.976
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.231
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.068
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056