And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.167
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.973
And
I accept adding "cowsay" to Additional Software
3.604
And
Additional Software is correctly configured for package "cowsay"
0.638
And
I shutdown Tails and wait for the computer to power off
4.071
And
I start Tails from USB drive "__internal" with network unplugged
35.481
And
I enable persistence
8.692
And
I configure APT to prefer an old version of cowsay
0.008
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
9.435
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.015
And
available upgrades have been checked
2.185
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.391
And
I can open the Additional Software configuration window from the notification
2.518
And
I shutdown Tails and wait for the computer to power off
13.021
And
I start Tails from USB drive "__internal" with network unplugged
36.021
And
I enable persistence
8.847
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.363
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.511
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063