And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.951
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.239
And
I accept adding "cowsay" to Additional Software
5.050
And
Additional Software is correctly configured for package "cowsay"
0.570
And
I shutdown Tails and wait for the computer to power off
4.052
And
I start Tails from USB drive "__internal" with network unplugged
37.621
And
I enable persistence
10.541
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.091
And
I log in to a new session
9.882
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.172
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.024
And
available upgrades have been checked
2.163
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.965
And
I can open the Additional Software configuration window from the notification
2.674
And
I shutdown Tails and wait for the computer to power off
18.571
And
I start Tails from USB drive "__internal" with network unplugged
37.411
And
I enable persistence
9.645
And
I configure APT to prefer an old version of cowsay
0.007
And
I log in to a new session
10.024
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.557
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.048
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058