And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.019
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.631
And
I accept adding "cowsay" to Additional Software
3.612
And
Additional Software is correctly configured for package "cowsay"
0.573
And
I shutdown Tails and wait for the computer to power off
3.950
And
I start Tails from USB drive "__internal" with network unplugged
35.486
And
I enable persistence
8.499
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
9.629
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.173
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.015
And
available upgrades have been checked
1.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.452
And
I can open the Additional Software configuration window from the notification
2.513
And
I shutdown Tails and wait for the computer to power off
18.328
And
I start Tails from USB drive "__internal" with network unplugged
35.513
And
I enable persistence
8.524
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.672
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067