And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.839
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.108
And
I accept adding "cowsay" to Additional Software
3.744
And
Additional Software is correctly configured for package "cowsay"
0.675
And
I shutdown Tails and wait for the computer to power off
4.078
And
I start Tails from USB drive "__internal" with network unplugged
37.138
And
I enable persistence
8.665
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
10.643
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.229
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.065
And
I prepare the Additional Software upgrade process to fail
0.057
And
the network is plugged
0.015
And
available upgrades have been checked
1.103
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.990
And
I can open the Additional Software configuration window from the notification
2.525
And
I shutdown Tails and wait for the computer to power off
17.663
And
I start Tails from USB drive "__internal" with network unplugged
36.910
And
I enable persistence
9.035
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
10.332
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.259
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.093
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045