And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:23.853
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.287
And
I accept adding "cowsay" to Additional Software
4.894
And
Additional Software is correctly configured for package "cowsay"
0.682
And
I shutdown Tails and wait for the computer to power off
4.118
And
I start Tails from USB drive "__internal" with network unplugged
38.609
And
I enable persistence
10.109
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.097
And
I log in to a new session
11.061
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.190
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.014
And
available upgrades have been checked
1.227
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.513
And
I can open the Additional Software configuration window from the notification
2.592
And
I shutdown Tails and wait for the computer to power off
17.935
And
I start Tails from USB drive "__internal" with network unplugged
39.364
And
I enable persistence
10.918
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
10.197
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.061
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060