And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.265
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.589
And
I accept adding "cowsay" to Additional Software
3.895
And
Additional Software is correctly configured for package "cowsay"
0.488
And
I shutdown Tails and wait for the computer to power off
2.570
And
I start Tails from USB drive "__internal" with network unplugged
31.787
And
I enable persistence
10.170
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.041
And
I log in to a new session
6.625
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.189
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.021
And
available upgrades have been checked
0.032
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.899
And
I can open the Additional Software configuration window from the notification
2.437
And
I shutdown Tails and wait for the computer to power off
12.449
And
I start Tails from USB drive "__internal" with network unplugged
32.452
And
I enable persistence
10.068
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.588
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.133
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.037
Then
the Additional Software upgrade service has started
0.037
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049