And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.508
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.965
And
I accept adding "cowsay" to Additional Software
3.803
And
Additional Software is correctly configured for package "cowsay"
0.612
And
I shutdown Tails and wait for the computer to power off
4.073
And
I start Tails from USB drive "__internal" with network unplugged
36.609
And
I enable persistence
8.526
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
8.641
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.019
And
available upgrades have been checked
2.208
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.959
And
I can open the Additional Software configuration window from the notification
2.490
And
I shutdown Tails and wait for the computer to power off
18.470
And
I start Tails from USB drive "__internal" with network unplugged
36.755
And
I enable persistence
8.500
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.453
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.183
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057