And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.754
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.746
And
I accept adding "cowsay" to Additional Software
3.775
And
Additional Software is correctly configured for package "cowsay"
0.613
And
I shutdown Tails and wait for the computer to power off
4.358
And
I start Tails from USB drive "__internal" with network unplugged
36.189
And
I enable persistence
9.690
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.056
And
I log in to a new session
9.423
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.234
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.016
And
available upgrades have been checked
1.127
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.450
And
I can open the Additional Software configuration window from the notification
2.569
And
I shutdown Tails and wait for the computer to power off
3.987
And
I start Tails from USB drive "__internal" with network unplugged
36.059
And
I enable persistence
8.885
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.731
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.227
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.074
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055