And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.126
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.564
And
I accept adding "cowsay" to Additional Software
4.014
And
Additional Software is correctly configured for package "cowsay"
0.456
And
I shutdown Tails and wait for the computer to power off
2.539
And
I start Tails from USB drive "__internal" with network unplugged
32.383
And
I enable persistence
10.735
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
6.436
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.056
And
the network is plugged
0.031
And
available upgrades have been checked
0.035
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.374
And
I can open the Additional Software configuration window from the notification
2.536
And
I shutdown Tails and wait for the computer to power off
17.374
And
I start Tails from USB drive "__internal" with network unplugged
31.965
And
I enable persistence
10.009
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.595
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.121
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.035
Then
the Additional Software upgrade service has started
0.042
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.048