And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.786
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.929
And
I accept adding "cowsay" to Additional Software
4.836
And
Additional Software is correctly configured for package "cowsay"
0.642
And
I shutdown Tails and wait for the computer to power off
4.255
And
I start Tails from USB drive "__internal" with network unplugged
37.361
And
I enable persistence
9.022
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
11.753
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.178
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.108
And
the network is plugged
0.021
And
available upgrades have been checked
2.160
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.498
And
I can open the Additional Software configuration window from the notification
2.535
And
I shutdown Tails and wait for the computer to power off
18.898
And
I start Tails from USB drive "__internal" with network unplugged
37.570
And
I enable persistence
10.813
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.983
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.055
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054