And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.086
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.798
And
I accept adding "cowsay" to Additional Software
3.587
And
Additional Software is correctly configured for package "cowsay"
0.601
And
I shutdown Tails and wait for the computer to power off
4.181
And
I start Tails from USB drive "__internal" with network unplugged
36.430
And
I enable persistence
9.610
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
8.394
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.013
And
available upgrades have been checked
2.135
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.425
And
I can open the Additional Software configuration window from the notification
2.539
And
I shutdown Tails and wait for the computer to power off
13.137
And
I start Tails from USB drive "__internal" with network unplugged
37.360
And
I enable persistence
9.010
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
9.441
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.226
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.050
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058