And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.815
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.274
And
I accept adding "cowsay" to Additional Software
3.909
And
Additional Software is correctly configured for package "cowsay"
0.478
And
I shutdown Tails and wait for the computer to power off
2.503
And
I start Tails from USB drive "__internal" with network unplugged
31.722
And
I enable persistence
10.983
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
6.666
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.038
And
available upgrades have been checked
1.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.793
And
I can open the Additional Software configuration window from the notification
2.587
And
I shutdown Tails and wait for the computer to power off
13.920
And
I start Tails from USB drive "__internal" with network unplugged
31.758
And
I enable persistence
10.207
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
6.631
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.144
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.034
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063