And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:10.934
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.753
And
I accept adding "cowsay" to Additional Software
4.029
And
Additional Software is correctly configured for package "cowsay"
0.570
And
I shutdown Tails and wait for the computer to power off
3.924
And
I start Tails from USB drive "__internal" with network unplugged
31.803
And
I enable persistence
10.581
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.039
And
I log in to a new session
6.795
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.156
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.035
And
available upgrades have been checked
2.174
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.221
And
I can open the Additional Software configuration window from the notification
2.389
And
I shutdown Tails and wait for the computer to power off
17.435
And
I start Tails from USB drive "__internal" with network unplugged
32.453
And
I enable persistence
10.724
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.307
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.171
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.033
Then
the Additional Software upgrade service has started
0.046
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.043