And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.642
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.939
And
I accept adding "cowsay" to Additional Software
4.876
And
Additional Software is correctly configured for package "cowsay"
0.551
And
I shutdown Tails and wait for the computer to power off
3.893
And
I start Tails from USB drive "__internal" with network unplugged
34.965
And
I enable persistence
12.433
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.047
And
I log in to a new session
8.108
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.394
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.037
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.834
And
I can open the Additional Software configuration window from the notification
2.718
And
I shutdown Tails and wait for the computer to power off
17.984
And
I start Tails from USB drive "__internal" with network unplugged
35.227
And
I enable persistence
16.394
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.548
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078