And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.580
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.425
And
I accept adding "cowsay" to Additional Software
5.307
And
Additional Software is correctly configured for package "cowsay"
0.573
And
I shutdown Tails and wait for the computer to power off
3.836
And
I start Tails from USB drive "__internal" with network unplugged
33.095
And
I enable persistence
10.729
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
7.283
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.167
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.045
And
the network is plugged
0.073
And
available upgrades have been checked
1.105
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.757
And
I can open the Additional Software configuration window from the notification
2.488
And
I shutdown Tails and wait for the computer to power off
17.628
And
I start Tails from USB drive "__internal" with network unplugged
32.513
And
I enable persistence
10.989
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.165
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.360
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.053
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063