And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.188
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.330
And
I accept adding "cowsay" to Additional Software
5.374
And
Additional Software is correctly configured for package "cowsay"
0.519
And
I shutdown Tails and wait for the computer to power off
4.165
And
I start Tails from USB drive "__internal" with network unplugged
33.691
And
I enable persistence
11.383
And
I configure APT to prefer an old version of cowsay
0.006
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
7.610
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.204
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.031
And
available upgrades have been checked
0.037
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.874
And
I can open the Additional Software configuration window from the notification
2.418
And
I shutdown Tails and wait for the computer to power off
17.747
And
I start Tails from USB drive "__internal" with network unplugged
34.269
And
I enable persistence
11.300
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
8.389
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.191
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.047
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.046