And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.852
And
I configure APT to prefer an old version of cowsay
0.006
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
6.252
And
I accept adding "cowsay" to Additional Software
4.852
And
Additional Software is correctly configured for package "cowsay"
0.552
And
I shutdown Tails and wait for the computer to power off
4.185
And
I start Tails from USB drive "__internal" with network unplugged
34.371
And
I enable persistence
11.861
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
8.110
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.181
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.025
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.026
And
available upgrades have been checked
2.190
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.850
And
I can open the Additional Software configuration window from the notification
2.396
And
I shutdown Tails and wait for the computer to power off
17.928
And
I start Tails from USB drive "__internal" with network unplugged
34.053
And
I enable persistence
11.572
And
I configure APT to prefer an old version of cowsay
0.004
And
I log in to a new session
7.636
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.146
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.036
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067