And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.418
And
I configure APT to prefer an old version of cowsay
0.004
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.060
And
I accept adding "cowsay" to Additional Software
5.155
And
Additional Software is correctly configured for package "cowsay"
0.538
And
I shutdown Tails and wait for the computer to power off
4.074
And
I start Tails from USB drive "__internal" with network unplugged
34.341
And
I enable persistence
11.972
And
I configure APT to prefer an old version of cowsay
0.007
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
7.087
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.160
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
I prepare the Additional Software upgrade process to fail
0.053
And
the network is plugged
0.026
And
available upgrades have been checked
0.048
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.825
And
I can open the Additional Software configuration window from the notification
2.588
And
I shutdown Tails and wait for the computer to power off
12.995
And
I start Tails from USB drive "__internal" with network unplugged
34.594
And
I enable persistence
11.399
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
9.235
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.179
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.041
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062