And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.954
And
I configure APT to prefer an old version of cowsay
0.007
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.339
And
I accept adding "cowsay" to Additional Software
4.984
And
Additional Software is correctly configured for package "cowsay"
0.599
And
I shutdown Tails and wait for the computer to power off
3.816
And
I start Tails from USB drive "__internal" with network unplugged
34.880
And
I enable persistence
12.151
And
I configure APT to prefer an old version of cowsay
0.005
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
7.431
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.189
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.071
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.875
And
I can open the Additional Software configuration window from the notification
2.722
And
I shutdown Tails and wait for the computer to power off
13.242
And
I start Tails from USB drive "__internal" with network unplugged
33.664
And
I enable persistence
10.749
And
I configure APT to prefer an old version of cowsay
0.040
And
I log in to a new session
8.423
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.154
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.026
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053