And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.935
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.933
And
I accept adding "cowsay" to Additional Software
5.126
And
Additional Software is correctly configured for package "cowsay"
0.636
And
I shutdown Tails and wait for the computer to power off
3.794
And
I start Tails from USB drive "__internal" with network unplugged
35.063
And
I enable persistence
12.892
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.038
And
I log in to a new session
8.362
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.187
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.027
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.507
And
I can open the Additional Software configuration window from the notification
2.620
And
I shutdown Tails and wait for the computer to power off
18.025
And
I start Tails from USB drive "__internal" with network unplugged
35.233
And
I enable persistence
11.502
And
I configure APT to prefer an old version of cowsay
0.005
And
I log in to a new session
7.607
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.196
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.073
And
the network is plugged
0.030
Then
the Additional Software upgrade service has started
0.053
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058