And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.748
And
I configure APT to prefer an old version of cowsay
0.005
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
5.550
And
I accept adding "cowsay" to Additional Software
4.857
And
Additional Software is correctly configured for package "cowsay"
0.524
And
I shutdown Tails and wait for the computer to power off
3.959
And
I start Tails from USB drive "__internal" with network unplugged
33.371
And
I enable persistence
11.144
And
I configure APT to prefer an old version of cowsay
0.004
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
8.137
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.175
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.029
And
the network is plugged
0.031
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.751
And
I can open the Additional Software configuration window from the notification
2.440
And
I shutdown Tails and wait for the computer to power off
17.771
And
I start Tails from USB drive "__internal" with network unplugged
32.701
And
I enable persistence
10.581
And
I configure APT to prefer an old version of cowsay
0.006
And
I log in to a new session
8.185
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been installed
10.159
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.027
Then
the Additional Software upgrade service has started
0.040
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.054